Tig Welder Welding Equipment

Advertisement

Parameters for TIG Welding FAQ, I tell you what unit I solved high frequency, lower levels of internet and built a home, and works well Now I can TIG welding. I ask for help to know the parameters of this type of welding: gas quantity, intensity per mm of base material, the electrode should protrude outside the nozzle tungsten ceramic high-frequency current. I covered electrode welder for some time but this is different. In advance thanks for your help!

Answer For Parameters for TIG Welding
Gun – (1800 th), mass + (4200 °). Gas Control up to 3 mm thick 5.6 l / m with Argon to Helium (+ expensive) 15 to 20 l / M
The rating plate test for 50, 60, to 10 mm thick test 110 + onwards – each machine varies for your point …
The high frequency is only for welding aluminum. The tungsten rod has to leave 5 mm + – and if you have to go over to grind a 70 º + – when you see it as anger varying flows.

if you are welding thin sheet (carbon steel of less than 3mm thick) with 80A and have enough gas flow 6.8 l / m. If you are welding per mm thickness greater mas.yo pipes 10A generally pay: Passing of root-100A and flow 8l / m always in all the past. Other past-110A. The intensity varies according to the tungsten utilices.Yo k salary with 1.6 and 2.4.