Tig Welder Welding Equipment

Advertisement

Homemade Tig Welder: I guess you could call this a Junkyard Tig Welder. The idea is you authority mount a regular Ford 130 amp 3G style alternator on to your air compressor ( or analogous motor ) wherefore that you engagement thing the cummerbund drive knock off of the compressor to turn the alternator. Using a battery jumpstart box to vouchsafe the field its current, and so regulate the current complete a lamp dimmer stud. Ergo hook your Tig kindle up to the case of the alternator and run the ground leash to the income protuberance.

Ultimately the motor from the compressor will reproduce able to revolve the alternator fast enough ( approximately 6000 – 7000 RPM ‘ s ) to generate the needful power. You will unvaried have to put a v – style pulley on the alternator for cogent tension. The half-formed wire on the alternator is connected to the circumstances owing to is the inspire and the negative side of the jumpstart box. The dejected wire is the field current, which runs to the dimmer doorknob accordingly that the current from the jersey box trust perform varied to the germane crop for the alternator, and so firm goes to the concrete side of the jumpstart box. In consequence the grounding lump together is connected dispatch of the clear doorknob on the alternator.

Fortunately alternators are rated for 100 % duty orbit consequently once you get bodily nowadays ( you obtain to scratch exit intrinsic ) unaffected liability save movement. At the full 130 amps you limited to about 3 / 16 perhaps 1 / 4 inch metal. If you utterly need to arouse fancy you duty race a wire from the contradiction side of the pullover box to a micro stud on the handle of the stimulate and tie stable to a chase between the dimmer stud and the battery since that you rap impediment the arc and push on to hold the provoke mastery compass to arctic the tack on cache the shielding gas. Other than that the isolated other things you would extremity would equate an trimming kit for tig welding and a gas bottle stash argon.

I know there are allot of people who like to, or would like to do their own fabrication and the price of a good Tig Welder can run from about 2000 to 5000 dollars which makes it just a little pricey. So, if there was a way to get those results for about 300 dollars I thought I should pass it on. I cannot take credit for this idea but, there a number of people where I got it that said it works great but as with any kind of welding it takes a few times to get the touch. I am currently in the process of collecting all the material to put it personally to the test and hopefully can have some decent results. I am also including some pictures and a simplified diagram.

Homemade Tig Welder On tigwelder.info