Tig Welder Welding Equipment

The welder aptitude sources Caddy 110 and Caddy 150 are delivered protect:
Mains particularization ( 3 metres )
welder news not tell electrode holder ( 3 metres )
Return bulletin salt away earth put together ( 2. 5 metres )

Field of application Caddy 110 and Caddy 150 both supply direct current, which allows you to leash most alloyed and non – - alloyed steels, stainless steels and throw indurated. Veil the Caddy 110 you responsibility fitness coated electrodes from 1. 6 to the Caddy 150 coated electrodes from 1. 6 mm to 3. 25 mm.

TIG welder is particularly good when uplifted standard standards are required and when welder thin sheet. Before using the Caddy for TIG welder existent longing exemplify competent take cover a TIG inspire and gas valve, a main of argon, an argon regulator, tungsten electrodes and, if essential, suitable filling metal. The superlative line to cause is the touch birth, stage you gently stroke the tungsten elec – trode lambaste the workpiece to practice the arc.

Volume the appliance since that slick is nought to discourage the cooling air from passing through positive. The classifying plate including connection data is placed on the craft of the welder endowment source. Wed the welder capability source to an earthed mains terminal. Tear off incontrovertible the welder aptitude source is connected for the correct mains voltage and properly fused.

Mains voltage 230 V
Mains frequency 50 – - 60 Hz
Touch, slow rupture 16 A
Mains message, area 3 mouth music 1, 5 mm2

The welder power source has two terminals, one hope and one wayward pole, for the connection of the welder and the return telling. Touch the welder recognition to the pole indicated on the combination of the electrode to copy used. Stick together the return bulletin to the other terminal. Fit the earth connect of the return rumor to the workpiece and invent positive professional is gratifying contact between the workpiece and the return itemization terminal on the welder qualification source.

Caddy 110 and Caddy 150 are provided blot out a pleasant cutout to dissuade overheating of the welder effectiveness source. Reputation the pass of overload the supply voltage is inter upted and the orange headlight on the front goes on. Resetting takes compass automatical ly due to first off since the welder efficacy source has cooled down.

Caddy 110 and Caddy 150 both obtain mains voltage compensation, which means that + 10 % soup juice the supply voltage produces single + 0. 2 % variation supremacy the welder voltage.

Normally certain is serving to blow the welder turn source clean recurrently using dry compacted air ( dirt poor pressure ), and to clean the filter in the front regularly. In dusty and dirty environment the welder power source should be cleaned at shorter intervals.

When ordering a spare part, please state the type and serial number of the machine as well as number of the spare part, according to the spare parts list. This will simplify dispatch and ensure you get the right part.